Home > Products > Medical Equipment > Anesthesia Monitors

Wondcon WME980B Patient monitor

Wondcon WME980B

Accuracy and durability,Mindry quality for OR,ICU,CCU use.

Inquire Now Next Product

PRODUCT DETAILS

Features

12 inch high resolution touchable display for easy reading

Portable design and user-friendly interface for easy operation

Flexible configurations to meet different clinical needs

Optional IBP,ETCO2,CO,VGA,printer

Optional CMS function,up to 64 beds

Optional wifi/3G/4G moduleBuilt-in rechargeable Lithium-ion battery for fluid

Built-in rechargeable battery

7 hours continuous working with battery

12 months warranty

Standard configuration specification
Display	Pulse rate
12.1” color TFT LCD touch Screen,resolution: 800 x 600 8 waveform display,12-leads ECG display	Range: 30~254 bpm Resolution: 1bpm Accuracy: ±3bpm (non-motion) ±5bpm (motion) Refreshing rate: 1s
I/O	NIBP
LAN: 1 standard RJ45 port WLAN: IEEE802.11b/g/n USB:2 USB connectors SD: 1 SD card socket Output:1 connector for nurse call,Defib sync analog output VGA: 1 color VGA monitor connector(optional)	Measurement method : Automatic oscillometric method Operating mode:Manual, automatic, continuous Measurement unit: mmHg/kPa selectable Typical measurement time: 20~40s Measurement type: Systolic, Diastolic,Mean Measurement range (mmHg) Range of Systolic pressure: Dog 40-270 Cat 40-200 Others 40-135 Range of Diastolic pressure: Dog 10-210 Cat 10-150 Others 10-95 Range of Mean pressure: Cat 20-230 Dog 20-165 Others 20-105 Measurement accuracy Maximum average error: ±5mmHg Maximum standard deviation: 8mmHg Resolution: 1mmHg Interval:1,2,3,4,5,10,15,30,60,90,120,180,240,48 0minutes Overpressure protection: Software and hardware,double safety protection Cuff pressure range: 0-280mmHg
RESP
Method:Trans-thoracic impedance Operation modes: Auto/Manual Measurement range: Adult:0~150 bmp
TEMP
Accuracy: ±0.1℃ or ±0.2℃ °F （without probe） Measurement range: 5~50℃（41~122° F） Channel:Two channels Resolution: 0.1℃ Parameters:T1,T2 and TD
Pulse rate
Range: 30~254 bpm Resolution: 1bpm Accuracy: ±3bpm (non-motion) ±5bpm (motion) Refreshing rate: 1s
SPO2	Operation environment
Measurement range : 0-100% Resolution: 1% Accuracy: ±2%（70-100% Cat/Dog);± 3%（70-100%,Others); 0-69%,unspecified Refreshing Rate: 1s	Power: AC 100-250V, 50/60Hz Temperature: 5-40℃ Humidity: ＜85%

Optional Configuration Specification
IBP Optional	Masimo IRMATM Mainstream CO2 (optional)
Channel:2-channel or 4-channel ART: 0 to 300 mmHg PA: -6 to 120 mmHg CVP/RAP/LAP/ICP : -10 to 40 mmHg Measurement range: P1/P2 -50 to 300 mmHg Resolution:1mmHg Accuracy: ±2% or ±1mmHg, whichever is greater(without sensor) Sensitivity: 5uV/mmHg/V Impedance range: 300 to 3000Ω	Measurement Range: 0 -25% Warm-up time: Full accuracy within 10 seconds Accuracy: 0~15% (±0.2% of the reading) 15~25%, unspecified AWRR Range: 0-150bpm
	VGA/HDMI(Optional)
	Connector to TV monitor
	WIFI/3G/4G module
	Connect internet
	CMS system
	At most up to 64 units
C.O. Optional	Recorder(optional)
Method: Thermodilution Range: C.O.: 0.2 to 20 L/min TB: 23 to 45 ℃ T1: -1 to 27℃ Accuracy:C.O.:±5% or ±0.1L/min， whichever is greater TB,T1：±0.5℃ (without sensor）	Built-in,Thermal dot array Horizontal resolution :16 dots/mm (25 mm/s paper speed) Vertical resolution:8 dots/mm Paper speed:25 mm/s, 50 mm/s Number of waveform channels:3ptional)